Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.
Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.
Blog Article
Don't undervalue the forklift at work. If the operation is not good, there will be major mishaps in mins, and there are several crashes entailing forklifts.
Instance 1: The forklift freight obstructed the driver's view, and the individual ahead can not be located, causing a moving mishap.
Instance 2: In order to maintain the balance of the forklift when lifting hefty items, the staff members utilized their body weight as the counterweight, which virtually created casualties.
Situation 3: The width of the forklift cargo exceeds the allowable size of the course and hangs on the roadside shelf, which almost creates an crash.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Situation 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the workers illegally, the forklift driver does not put on the safety belt, the forklift lifter falls and the vehicle driver is squashed when the forklift rolls over.
Case 7: The forklift vehicle driver did not use a seat belt and dropped from the car when it rolled over and was squashed.
Forklift operation need to pay attention to these issues ：.
Begin.
1. Prior to beginning, observe the surroundings, and after confirming that there are no barriers that impede the safety of driving, beep the horn first and after that begin.
2. For automobiles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) gauge have to be safe before starting.
3. When the forklift begins with a load, the driver needs to first validate that the tons is steady and trustworthy.
4. The beginning needs to be slow and steady.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the mast must be slanted backwards. .
2. Do not lift the fork expensive when driving. When getting in and leaving the task site or while driving, be careful that there will be no obstacles overhead. When the lots is traveling, the fork must not be elevated expensive, which will affect the security of the forklift. .
3. After dumping, the fork should be decreased to the normal driving placement prior to driving. .
4. When turning, if there are pedestrians or vehicles close by, the driving signal must be issued first. High-speed doglegs are banned. High-speed doglegs will create the car to shed lateral stability and topple. .
5. When the forklift is downhill, it is strictly forbidden to shut off the flame and slide, and it is restricted to brake instantly while driving with loads unless there are special conditions.
6. When the forklift is running, it needs to obey the traffic rules in the manufacturing facility and have to keep a specific safety distance from the vehicle ahead. .
7. When the forklift is running, the load has to remain in the lowest setting that does not impede the driving, and the gantry should be correctly slanted back. The lots shall not be increased except when stacking or loading. .
8. The elevation of the tons need to not block the motorist's sight. In special conditions, when the thing affects the forward vision, drive at a reduced speed when turning around.
9. It is forbidden to activate the ramp, nor to drive across the ramp. .
10. The risk-free driving rate of the forklift in the factory location is 5 km/h, and it needs to drive securely at a reduced speed when entering the production workshop area. .
11. When the forklift is lifted, lifted or driven, it is forbidden for employees to stand on the fork to hold items and play a stabilizing duty. .
12. If problems are found, they will be repaired and reported in a prompt fashion, and they will never operate with diseases or conceal them.
filling and dumping.
1. When fork-loading items, the range between the two forks ought to be changed as required to make the tons of the two forks well balanced and not manipulated, and one side of the item need to be against the shelf. .
2. It is forbidden to collaborate with a single fork or use a fork top or pull. In unique conditions, safety and security warning signs need to be set up to advise bordering pedestrians. .
3. In the process of filling and dumping products, the forklift has to be stopped with the brake. .
4. The rate of the car ought to be slow and constant. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled objects and injure individuals. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as feasible under the load, and it ought to be kept in mind that the fork tip must not touch various other products or things. The lots should be maintained with marginal back tilt of the gantry to ensure that the lots does not move backwards. The pole can be tilted ahead a little when the load is lowered to enable very easy placement of the lots and extraction of the forks. .
6. It is forbidden to fork products at high speed and collide with difficult items with the fork head. .
7. When the forklift is functioning, it is restricted for individuals to loaf the fork, so as to avoid the collapse of the goods and harm individuals. .
8. Overwhelming is banned, and it is prohibited to use forks to lift employees to take part in high-altitude operations to avoid high-altitude dropping accidents. .
9. It is not allowed to make use of the brake inertia to slide, put, round or roll objects. .
10. It is not permitted to use forks to pick, turn pallet dump.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Prior to leaving the forklift, you need to Electric Forklift Truck for Warehouse discharge the goods or lower the fork framework.
2. Pull the emergency brake manage to dead or dispirit the emergency brake switch.
3. The engine is switched off and the power is removed. (Except for special situations, such as the chauffeur does not leave the vehicle's line of sight and does not surpass 1 minute).
4. Remove the trick. .
Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance should be inspected, and fuel, lubing oil and air conditioning water need to be added.
2. Examine the safety and security performance of beginning, running and braking.
3. Check whether the lights and horn signals are full and efficient.
4. Throughout the operation of the forklift, inspect whether the pressure and temperature level are normal.
5. After the forklift is running, the outside leakage must likewise be checked and the seals need to be replaced in time.
Forklift Safety Operation Specifications.
1. You have to check before leaving the automobile;.
2. When you run into someone before you throughout Electric Forklift Truck for Warehouse driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the nadir of the freight ought to be 0.3 m ~ 0.4 m in the air;.
5. The transforming need to not be as well sharp to stop the tendency of " complimentary switching";.
6. Running up and down the incline should be sluggish and consistent, and no turning on the incline is allowed.
7. Do not drive across the slope. When the gradient is more than 10%, the lorry should be driven in reverse when worsening;.
8. When the forklift workers carry the goods and move forward, if they come across huge or heavy goods and most likely to the driver's line of sight, they must take the reversing exercise
.
The "Eight Prohibitions" must be complied with in the operation.
1. Solitary fork operation is not enabled.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to pick up the goods by handing over the pallet with the fork.
4. It is not enabled to directly shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not allowed to make use of inertia pressure to grab the goods.
6. It is not enabled to utilize stopping pressure to exile round or easy-to-roll things.
7. It is not enabled to bring people to work on the pallet or fork, and it is purely prohibited to stand under the fork after the fork is increased.
8. Do not drive laterally on inclines
.
Car park is not permitted under the following problems.
1. Curves, narrow roadways, train crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an obstacle on one side of the roadway, the contrary side of the area with the same size as the barrier need to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844